/
_966

_966

Owned by Chris Kite
Jan 25, 2024
 I-M0167 (Label, Dryer, Rubber Grommet)
Readers: F2,FLEX,L2,F3
Install Type: Card Only

Part #: C-6801

Desc 1: F2/F3 Reader Mounting Kit

Desc 2: Universal

   Qty: 1

Part #: C-5035

Desc 1: Label

Desc 2: 3-7/8" x 3-1/4"

   Qty: 1

Part #: C-5710

Desc 1: Rubber Grommet

Desc 2: 3/4"

   Qty: 1

  1. Apply C-5035 Label over the coin drop or card slot opening.

  2. Place the C-6700-TEMP Drill Template on the desired mounting location.

  3. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  4. Refer to FasCard Mounting Guide for further instructions.