_972
- Chris Kite
Part #: C-5365
Desc 1: Bypass Harness
Desc 2: Alliance Coin Vault Bypass
Qty: 1
Part #: C-0941
Desc 1: Vault Cover
Desc 2: 3-7/8" x 3-1/2"
Qty: 1
Part #: C-5035
Desc 1: Label
Desc 2: 3-7/8" x 3-1/4"
Qty: 1
Part #: C-5801
Desc 1: F1 Reader Mounting Kit
Desc 2: Front
Qty: 1
Remove existing coin box and coin slide.
Remove connection to coin vault service switch and bridge connections using C-5365 Bypass Harness.
Bend the side tabs of the C-0941 Vault Cover outward and install into the coin vault. The tabs should snap into place securing the bracket.
Apply C-5035 Label over the opening where the coin slide was previously installed.
Place the C-5700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to FasCard Mounting Guide for further instructions.