_1017

Part #: C-5101

Desc 1: Spade Taps

Desc 2: 18-14 AWG

   Qty: 3

Part #: C-5210

Desc 1: Power Adapter Harness

Desc 2: CGI

   Qty: 1

Part #: C-5500

Desc 1: Power Extension Harness

Desc 2: 25.5"

   Qty: 1

Part #: C-5602R1

Desc 1: Power Converter

Desc 2: SMT-012-018VW

   Qty: 1

Part #: C-0105

Desc 1: Machine Start Harness

Desc 2: Vendrite Royal 200

   Qty: 1

Power

1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Machine Interface

1. Connect the C-0105 Machine Start Harness to the machine.

   1. Connect C-0105 Machine Start Harness bundled Blue and Red connectors.

      1. Blue connector goes to Common.

      2. Red connector goes to Normally Open.

   2. C-0105 Machine Start Harness bundled Red connectors.

      1. Red connectors go to Sel.