_957

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-X0011

Part #: C-6401

Desc 1: F2, Stack Add On Board - MLV

Desc 2: Serial / MultiVend

   Qty: 1

Part #: C-5240-144

Desc 1: Machine Start Harness

Desc 2: 144" for Alliance ACA

   Qty: 1

Part #: C-0940

Desc 1: Vault Cover

Desc 2: 3-7/8" x 2-3/4"

   Qty: 1

Part #: C-5033

Desc 1: Label

Desc 2: 4-5/8" x 3-1/2"

   Qty: 1

  1. Install C-0940 Vault Cover into the coin vault for the secondary control.

  2. Run C-5240-144 Machine Start Harness to the second Machine Control Assembly.

  3. Connect C-5240-144 Machine Start Harness to the H3 connection on the second Machine Control Assembly.

  4. Connect the C-6401 Stack Add-on Board to port 5 (Serial Connection Port) on the F2 reader.

    1. Connect the Machine Start Harness connected to the upper pocket Machine Control Assembly to Unit 1 on the Stack Add-on Board.

    2. Connect the Machine Start Harness connected to the lower pocket Machine Control Assembly to Unit 2 on the Stack Add-on Board.