_961

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-M0163

Part #: C-0913

Desc 1: Drop Cover

Desc 2: Maytag Stack Dryer

   Qty: 1

Part #: C-1062

Desc 1: Nut

Desc 2: 4-40 - Kep

   Qty: 4

Part #: C-5801

Desc 1: F1 Reader Mounting Kit

Desc 2: Front

   Qty: 1

  1. Remove existing coin drop.

  2. Install C-0913 Coin Drop Cover where the coin drop was previously mounted. Secure using C-1062 Kep Nut.

  3. Place the C-5700-TEMP Drill Template on the desired mounting location.

  4. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  5. Refer to FasCard Mounting Guide for further instructions.