_942

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-M0154

Part #:

Desc 1: Kit ID: I-M0154

Desc 2:

   Qty: 0

Part #: C-6914

Desc 1: Mounting Bracket

Desc 2: Maytag

   Qty: 1

Part #: C-0940

Desc 1: Vault Cover

Desc 2: 3-7/8" x 2-3/4"

   Qty: 1

Part #: C-1042

Desc 1: Nut

Desc 2: 8-32 - Kep

   Qty: 4

Part #: C-5414

Desc 1: F2/F3 Std. Mounting Bracket

Desc 2: Sheet metal base

   Qty: 1

Part #: C-5416

Desc 1: Screw

Desc 2: 8-32" x 3/8" - Button - Torx

   Qty: 2

  1. Remove coin drop and coin box.

  2. Place the C-5414 Standard Bracket over the side of the C-6914 Mounting Bracket with the two central threaded studs. Insert the two threaded studs through the matching holes in the C-5414 Standard Bracket and then secure in place using (2) C-1042 8-32 Kep Nuts.

  3. Install C-6914 Mounting Bracket where the coin drop was originally mounted on the machine. Secure in place using (2) C-1042 8-32 Kep Nuts with the upper and lower central threaded stud.

  4. Spread the inner tabs outward on the C-0940 Vault cover and install into the coin vault.