0034 Reader Install Guide

Owned by David Bussman
Nov 07, 2024
1 min read

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Tumble Dryer (Single)
Manufacturer: N/A
Make: Continental
Model Length: 6

One time legacy exception was permitted. Otherwise, machines are not supported for new installations.

Two versions. One made by ADC. One made by Alliance.

Associated Models

CG7585

Recommended Tools and Supplies

  • Drill

  • 1 1/8" Tungsten Carbide Tipped Hole Cutter

  • Cutting Oil

  • 9/64" Drill Bit

  • Center Punch

  • Hammer

  • Fine Point Permanent Marker

  • Pliers

  • Tape Measure

Installation

Connect Coin Sense Harness

No COIN SENSE kits exist for this equipment.

Extras

No EXTRAS kits exist for this equipment.

Machine Configuration

None required.