0116 Reader Install Guide
- Chris Kite
- David Bussman
- CCI Integration User
Warning!
This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.
It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.
Overview
Equipment Details
Type: Tumble Dryer (Stack)
Manufacturer: Laundrylux
Make: Electrolux
Model Length: 6
Associated Models
T4300S
T4330S
T43OOS
T4420S
T4425S
T4440S
Recommended Tools and Supplies
Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure
Installation
Part #: C-5358
Desc 1: Coin Sense Harness (SA)
Desc 2: TD
Qty: 1
Disconnect the Coin Drop from the Machine Control Assembly.
Connect the C-5358 Coin Sense Harness to the harness connected to the Coin Drop.
Match each of the colored wires from the coin drop to the matching wire on the coin sense harness.