_827

 I-M0098

Part #: C-5033

Desc 1: Label

Desc 2: 4-5/8" x 3-1/2"

   Qty: 1

Part #: C-0133

Desc 1: Standoff

Desc 2: 8-32" x 1-1/2" - Hex

   Qty: 2

Part #: C-0144

Desc 1: Screw

Desc 2: 8-32 x 2" - Flat

   Qty: 2

Part #: C-0936

Desc 1: Vault Mount Bracket

Desc 2:

   Qty: 1

Part #: C-5027

Desc 1: Label

Desc 2: Credit Card Logo

   Qty: 1

Part #: C-5365

Desc 1: Bypass Harness

Desc 2: Alliance Coin Vault Bypass

   Qty: 1

  1. Remove existing coin box and coin drop.

  2. Remove wires connected to the coin vault service switch and connect together using C-5365 Bypass Harness.

  3. Bend the side tabs of the C-0936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  4. Attach the C-0133 Standoffs to the Vault Bracket.

  5. Attach the reader to the C-0936 Vault Bracket using C-0144 Screws.

  6. Apply C-5033 Label over the coin drop opening.

  7. Optional: Apply C-5027 Label for any applicable credit cards accepted on or near the reader.