_780

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-M0068

Part #: C-0141

Desc 1: Screw

Desc 2: 8-32 x 1-1/2" - Cap

   Qty: 2

Part #: C-5027

Desc 1: Label

Desc 2: Credit Card Logo

   Qty: 1

Part #: C-5700

Desc 1: Mounting Bracket

Desc 2: Surface Mount

   Qty: 1

  1. Place the C-5700-TEMP Drill Template on the desired mounting location.

  2. Mark hole "D" for the pilot hole to run the harnesses to the reader. Mark "C" and "E" holes to provide mounting points for the reader bracket.

  3. Use a 1-1/8" hole saw to drill a hole at position "D".

  4. Place and align C-5700 F1 Mounting Bracket so that the center hole aligns with hole "D" and the two holes immediately to the left and right align with the holes marked for "C" and "E".

  5. Using material appropriate fasteners (Not Provided.), secure the C-5700 F1 Mounting Bracket to the surface using points "C" and "E".

  6. Optional: If accepting credit cards, apply the C-5027 Label on or near the F1 card reader for applicable credit cards.