_875

Owned by Chris Kite
Jan 25, 2024
1 min read
 I-C0002

Part #: C-5310

Desc 1: Combination Harness

Desc 2: Gen Pulse Sense Eye

   Qty: 1

Coin Sense

  1. Disconnect the Coin Drop from the Machine Control Assembly.

    1. If the Coin Drop sensor harness does not have a disconnect, it must be cut and stripped.

  2. Connect the C-5310 Combination Harness to the disconnected wires leading to the Coin Drop. Connect each of the wires to the corresponding color on the terminal block with the red, green, and blue wires.

Start

  1. Connect the end with the Green and Blue with jumper wire end to the machine.

    1. Red wire connects at the Jumper. Green and blue wires connect to the corresponding connections.

  2. Disconnect wires from Coin Block solenoid.

    1. Connect these wires to the White (male) spade connector on the C-5310 Combination Harness.

  3. Connect White (female) spade connector on C-5310 Combination Harness to the Coin Block solenoid.