_772

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-M0061

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

Part #: C-0031

Desc 1: Label

Desc 2: Dexter Instruction Panel

   Qty: 1

Part #: C-0144

Desc 1: Screw

Desc 2: 8-32 x 2" - Flat

   Qty: 2

Part #: C-0905

Desc 1: Drop Cover

Desc 2: 2-3/8" x 4-5/8"

   Qty: 1

Part #: C-0960

Desc 1: Mounting Bracket

Desc 2: IPSO

   Qty: 1

Part #: C-0961

Desc 1: Jam ring

Desc 2: IPSO

   Qty: 1

Part #: C-1043

Desc 1: Screw

Desc 2: 8-32 x 1-3/4" - Flat

   Qty: 2

  1. Install the C-0961 Jam Ring into the coin vault. The Jam Ring should be installed into the coin vault so that it is within 1.5" of front panel of the machine to allow the mounting bracket to be attached.

  2. To install the Jam Ring insert the ring so the small portion is on the bottom. Insert at an angle, so the top of the Jam Ring is inserted first. Once the ring is in position, pull the top of the Jam Ring towards the front of the machine until it locks into place.

  3. Using the C-0144 Screws, attach the C-0960 Mounting Bracket to the C-0961 Jam Ring.

  4. Secure reader to C-0960 Mounting Bracket using C-1043 Screw.

  5. Install the C-0905 Drop Cover where the coin drop was installed. Secure using the original hardware.

  6. Apply C-0031 Label over the C-0905 Drop Cover.