_842
- Chris Kite
Part #: C-0144
Desc 1: Screw
Desc 2: 8-32 x 2" - Flat
Qty: 2
Part #: C-0905
Desc 1: Drop Cover
Desc 2: 2-3/8" x 4-5/8"
Qty: 1
Part #: C-5710
Desc 1: Rubber Grommet
Desc 2: 3/4"
Qty: 1
Part #: C-6801
Desc 1: F2/F3 Reader Mounting Kit
Desc 2: Universal
Qty: 1
Part #: C-6936
Desc 1: F2, Sm Vault Mount Bracket
Desc 2:
Qty: 1
Remove existing coin box and coin drop.
Install C-0905 Drop Cover where the coin drop was previously mounted. Secure in place using the existing hardware.
Align the C-5414 Mounting Bracket with the C-6936 Vault Bracket with the C-5414 Mounting Bracket on top. Run all reader harnesses through the holes in the brackets.
Bend the side tabs of the C-6936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.
Attach C-5414 Mounting Bracket to the C-6936 Vault Bracket using C-0144 Screws.
Install the C-5710 Rubber Grommet into the circular opening of the C-5414 F2 Mounting Bracket.