_883

Part #: C-6307

Desc 1: Combination Harness

Desc 2: MD2

   Qty: 1

Coin Sense

1. Disconnect the Coin Eye Harness from the Coin Drop.

2. Connect the C-6307 Coin Sense Harness end with the red, blue, and green wires to the harness connected to the Coin Drop.

3. Connect the matching two white male connectors on the C-6307 Machine Start Harness to the wires previously connected to the Coin Blocking Solenoid.

Machine Interface

1. Connect the C-6307 Machine Start Harness connector with the purple wires to the Coin Counting Board Harness where the coin drop was previously connected.

2. Connect the matching two white female connectors on the C-6307 Machine Start Harness to the Coin Blocking Solenoid.