_847
- Chris Kite
Owned by Chris Kite
Jan 24, 2024
1 min read
Loading data...
I-M0110
Part #: C-5414
Desc 1: F2/F3 Std. Mounting Bracket
Desc 2: Sheet metal base
Qty: 1
Part #: C-5416
Desc 1: Screw
Desc 2: 8-32" x 3/8" - Button - Torx
Qty: 2
Place the C-6700-TEMP Drill Template on the desired mounting location.
Mark hole "C" for the pilot hole to run the harnesses to the reader. Mark "D" and "E" holes to provide mounting points for the reader bracket.
Use a 1-1/8" hole saw to drill a hole at position "C".
Place and align C-5414 F2 Mounting Bracket so that the center hole aligns with hole "C" and the two holes immediately to the left and right align with the holes marked for "D" and "E".
Using material appropriate fasteners (Not Provided.), secure the C-5414 F2 Mounting Bracket to the surface using points "D" and "E".
Â