_796
- Chris Kite
Part #: C-0133
Desc 1: Standoff
Desc 2: 8-32" x 1-1/2" - Hex
Qty: 2
Part #: C-0144
Desc 1: Screw
Desc 2: 8-32 x 2" - Flat
Qty: 2
Part #: C-0936
Desc 1: Vault Mount Bracket
Desc 2:
Qty: 1
Part #: C-5027
Desc 1: Label
Desc 2: Credit Card Logo
Qty: 1
Part #: C-5365
Desc 1: Bypass Harness
Desc 2: Alliance Coin Vault Bypass
Qty: 1
Part #: C-5033
Desc 1: Label
Desc 2: 4-5/8" x 3-1/2"
Qty: 1
Remove existing coin box and coin drop.
Install the C-5365 Bypass Harness by removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.
Bend the side tabs of the C-0936 Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.
Attach the C-0133 Standoffs to the Bracket.
Attach reader to C-0936 Vault Mount Bracket using C-0144 Screws.
Apply C-5033 Label over the coin drop opening.
Optional: Apply C-5027 Label on or near the reader for any accepted credit card issuers.