_861
- Chris Kite
Part #: C-1059
Desc 1: Nut
Desc 2: 10-32 - Kep
Qty: 2
Part #: C-1070-W
Desc 1: Washer - Build: XCH
Desc 2: 1/4" x 1" O.D.
Qty: 2
Part #: C-5760-A
Desc 1: Alliance Adapter Bracket
Desc 2: Mounts C-5760 to MeterCase
Qty: 1
Part #: C-6762
Desc 1: Metercase Bracket
Desc 2: Coin Slide Ready Machine
Qty: 1
Part #: C-5365
Desc 1: Bypass Harness
Desc 2: Alliance Coin Vault Bypass
Qty: 1
Part #: C-5420
Desc 1: Screw
Desc 2: 10-32 x ¼" - Pan
Qty: 2
Part #: C-5416
Desc 1: Screw
Desc 2: 8-32" x 3/8" - Button - Torx
Qty: 2
Part #: C-5414
Desc 1: F2/F3 Std. Mounting Bracket
Desc 2: Sheet metal base
Qty: 1
Remove the coin drop and coin box.
Remove Vault Switch and bridge the wires previously connected to the Vault Switch with the C-5365 Bypass Harness.
Secure C-5414 F2 Mounting Bracket to the C-6903 Mounting Bracket using the (2) C-5420 Screws.
Attach the C-5760-A Adapter Bracket to the C-6762 Mounting Bracket to the captured nut on the inside of the C-6762 Mounting Bracket.
Run all reader harnesses through the metercase and out the opening where the coin drop normally mounts.
Run all reader harnesses through the circular opening on the C-6762 Mounting Bracket.
Install the C-6762 Mounting Bracket into the front opening of the metercase so the two threaded posts of the C-5760-A Adapter Bracket line up with the openings for the coin slots.
Secure to the metercase using the (2) C-1059 Kep Nuts and (2) C-1070-W Washers.