_826

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-M0097

Part #: C-0133

Desc 1: Standoff

Desc 2: 8-32" x 1-1/2" - Hex

   Qty: 2

Part #: C-0141

Desc 1: Screw

Desc 2: 8-32 x 1-1/2" - Cap

   Qty: 2

Part #: C-0906

Desc 1: Spacer Plate

Desc 2: 5 1/2" x 4 3/8"

   Qty: 1

Part #: C-0936

Desc 1: Vault Mount Bracket

Desc 2:

   Qty: 1

Part #: C-0963

Desc 1: Drop Cover

Desc 2: 2-3/8" x 4-5/8" - Black

   Qty: 1

Part #: C-1062

Desc 1: Nut

Desc 2: 4-40 - Kep

   Qty: 4

Part #: C-5027

Desc 1: Label

Desc 2: Credit Card Logo

   Qty: 1

  1. Remove existing coin box and coin drop.

  2. Bend the side tabs of the C-0936 Vault Mount Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  3. Attach the C-0132 Standoffs to the Vault Mount Bracket.

  4. Install C-0963 Drop Cover into the coin drop opening and attach using (4) C-1062 4-40 Keps Nuts.

  5. Before attaching the F1 reader to the C-0936 Vault Mount Bracket, place the C-0906 Spacer Plate over the opening so that small openings align with the C-0132 Standoffs.

  6. Optional: Place the C-5027 Label on or near the F1 reader for any accepted credit card issuers.