_751
- Chris Kite
Part #: C-0015
Desc 1: Label
Desc 2: Reader Cover Label
Qty: 1
Part #: C-0032
Desc 1: Label
Desc 2: ADC Coin Drop
Qty: 1
Part #: C-0133
Desc 1: Standoff
Desc 2: 8-32" x 1-1/2" - Hex
Qty: 2
Part #: C-0141
Desc 1: Screw
Desc 2: 8-32 x 1-1/2" - Cap
Qty: 2
Part #: C-0924A
Desc 1: Mounting Bracket
Desc 2: ADC 360 - Left
Qty: 1
Part #: C-0924B
Desc 1: Mounting Bracket
Desc 2: ADC 360 - Left
Qty: 1
Part #: C-0926
Desc 1: Drop Cover
Desc 2: American 330
Qty: 1
Part #: C-1044N
Desc 1: Nut
Desc 2: M3 - Kep
Qty: 2
Remove the existing coin drop.
Refer to manufacturer documentation as needed.
Install C-0926 Drop Cover over the cavity left by removing the coin drop. Secure in place using the C-1044N Kep Nut.
Apply C-0032 Coin Drop Label over the C-0926 Drop Cover.
Install the C-0924A Mounting Bracket into the coin vault and attach C-0133 Standoffs.
When installing reader, place C-0924B Cover Bracket over the coin vault before inserting the card reader. Then secure in place the brackets and reader using the C-0141 Screws.