3594 Reader Install Guide

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Stack Washer/Dryer
Manufacturer: Alliance
Make: [VARIES]
Model Length: 15

Associated Models

HTEBCFSP172TW01
STEBCFSP172TW01
STGBCFSP112AW01
STGBCFSP112TW01

Recommended Tools and Supplies

Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure

Installation

Machine Configuration

Power off the machine.
Connect the C-0110-CP Jumper Plug to the H6 connection on the Machine Control Assembly.
Power on the machine.

CCI Software Configuration

Machine Control	Pulse	Serial
MDC (Vended)	SingleVend (MLV+) / 80ms	Alliance MDC Small Dryer
MDC (Vended)	SingleVend (MLV+) / 80ms	Alliance MDC Front Load Washer

CCI Documentation