3421 Reader Install Guide
- Chris Kite
- CCI Integration User
Warning!
This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.
It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.
Overview
Equipment Details
Type: Stack Washer/Dryer
Manufacturer: Alliance
Make: [VARIES]
Model Length: 15
Two separate controls. Dual pocket setup not supported at this time due to different equipment types.
For ACA control equipped models with an "X" as the 8th character, they will need to clarify if they will be using an electronic coin drop that requires the H10 accessory power connection. If so, they will need the "Electronic Coin Drop Equipped" power kit instead of the "H10 Accessory Power" kit.
Associated Models
HTENXASP133DW01
HTENXASP133FW01
HTENXASP283CW01
HTENXASP293CW01
HTENXASP543DW01
HTENYASP283CW01
HTENYASP293CW01
HTGNXASP093CW01
HTGNXASP113FW01
HTGNXASP123DW01
HTGNXASP543DW01
STENCASP173TW01
STENCASP175TW01
STENCASP176TW01
STENCFSP176TW01
STENXASP133DW01
STENXASP133FW01
STENXASP173TW01
STENXASP175TW01
STENXASP283CW01
STENXASP293CW01
STENXASP433AW01
STENXASP543DN01
STENXASP543DW01
STENYASP173TN01
STENYASP173TW01
STENYASP175TW01
STENYASP176TW01
STENYASP283CW01
STENYASP293CW01
STENYFSP175TW01
STGNCASP113TW01
STGNCASP115TW01
STGNCASP116TW01
STGNCAST115TW01
STGNCFSP115TW01
STGNXASG113JW01
STGNXASG113TW01
STGNXASG115TW01
STGNXASP093CW01
STGNXASP113FW01
STGNXASP113TW01
STGNXASP123DW01
STGNXASP303AW01
STGNXASP543DN01
STGNXASP543DW01
STGNYASA115TW01
STGNYASP093CW01
STGNYASP113TN01
STGNYASP113TW01
STGNYASP115PW01
STGNYASP115TW01
STGNYASP116TW01
STGNYAST115GW01
STGNYAST115TW01
STGNYFFT115TW01
STGNYFSP115TW01
STGNYFSP116TW01
STLNYASP543PW01
Recommended Tools and Supplies
Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure