_1057

Owned by Chris Kite
Jan 25, 2024
1 min read

 I-M0210

Part #: C-0975

Desc 1: LC/F1 Quantum Touch Bracket

Desc 2:

   Qty: 1

Part #: C-0141

Desc 1: Screw

Desc 2: 8-32 x 1-1/2" - Cap

   Qty: 2

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

  1. Remove the front control panel cover and pull panel away from machine exposing the factory plate / Coin Drop.

  2. Loosen the two (2) left retaining screws (Green) and remove the remaining screws on the bracket (Blue) and slide the bracket off the machine.

    QT_Mount_Step03-20240125-061006.jpg

  3. Slide the C-0975 QT Mounting Bracket onto the loose screws and tighten. Add remaining screws to the corresponding holes on the bracket and tighten.

    QT_Mount_Step04-20240125-061007.jpg

  4. Re-secure the front panel to the machine.

  5. After connecting all harnesses to the reader, use C-0141 8-32 x 1-1/2" Socket Screws to attach the reader to the C-0975 QT Mounting Bracket. Then apply C-0015 Label over the screw holes.