_1068

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-X0025

Part #: C-6401

Desc 1: Stack Add On Board - MLV

Desc 2: Serial / MultiVend

   Qty: 1

Part #: C-0110-TOP-144

Desc 1: Machine Start Harness

Desc 2: 144" - Alliance Pre-ACA

   Qty: 1

Part #: C-5033

Desc 1: Label

Desc 2: 4-5/8" x 3-1/2"

   Qty: 1

Part #: C-0110-CP

Desc 1: Jumper Plug

Desc 2: Enables card mode on pre-ACA

   Qty: 1

  1. Run C-0110-TOP-144 Machine Start Harness to the second Machine Control Assembly.

  2. Connect C-0110-TOP-144 Machine Start Harness to the H3 connection on the second Machine Control Assembly.

  3. Connect the C-6401 Stack Add-on Board to port 5 (Serial Connection Port) on the F2 reader.

    1. Connect the Machine Start Harness connected to the upper pocket Machine Control Assembly to Unit 1 on the Stack Add-on Board.

    2. Connect the Machine Start Harness connected to the lower pocket Machine Control Assembly to Unit 2 on the Stack Add-on Board.