_1056

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-M0209

Part #:

Desc 1: Kit ID: I-M0209

Desc 2:

   Qty: 0

Part #: C-0936

Desc 1: Vault Mount Bracket

Desc 2:

   Qty: 1

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

Part #: C-0133

Desc 1: Standoff

Desc 2: 8-32" x 1-1/2" - Hex

   Qty: 2

Part #: C-0146

Desc 1: Screw

Desc 2: 8-32 x 1-1/4" - Cap

   Qty: 2

Part #: C-5035

Desc 1: Label

Desc 2: 3-7/8" x 3-1/4"

   Qty: 1

Part #: C-0906

Desc 1: Spacer Plate

Desc 2: 5 1/2" x 4 3/8"

   Qty: 1

  1. Removed existing coin box and coin drop.

  2. Bend the inner tabs of the C-0936 Vault Bracket outwards to allow them to catch on the inner lip of the coin vault.

  3. Insert the C-0936 Vault Bracket into the coin vault and ensure the tabs lock into place.

  4. Attach the (2) C-0133 8-32 x 1-1/2" Hex Standoffs to the threaded studs on the C-0936 Vault Bracket.

  5. Run the start harness and ethernet cables through the central opening of the C-0936 Vault Bracket and C-0906 Spacer Plate.

  6. After all cables and harnesses are connected, secure the reader to the C-0936 Vault Bracket using the (2) C-0146 8-32 x 1-1/4" Socket Screws.

  7. Apply the C-5035 Label over the coin drop opening.

  8. After the LaundryCard reader is setup and tested, apply the C-0015 Reader Cover Label over the LaundryCard reader screw holes.