_1054

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-M0207

Part #: C-0133

Desc 1: Standoff

Desc 2: 8-32" x 1-1/2" - Hex

   Qty: 2

Part #: C-0141

Desc 1: Screw

Desc 2: 8-32 x 1-1/2" - Cap

   Qty: 2

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

Part #: C-0906

Desc 1: Spacer Plate

Desc 2: 5 1/2" x 4 3/8"

   Qty: 1

Part #: C-0936

Desc 1: Vault Mount Bracket

Desc 2:

   Qty: 1

Part #: C-5035

Desc 1: Label

Desc 2: 3-7/8" x 3-1/4"

   Qty: 1

  1. Remove existing coin box and coin drop.

  2. Bend the side tabs of the C-0936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  3. Attach the (2) C-0133 8-32 x 1-1/2" Hex Standoffs to the C-0936 Vault Bracket.

  4. Run the ethernet cables and start harness through the coin vault opening and C-0936 Vault Bracket.

  5. Before attaching the reader to the C-0936 Vault Bracket remove the protective film from the C-0906 Spacer Plate and place between the reader and the machine's front panel so it aligns with the C-0936 Vault Bracket openings.

  6. Attach the reader to the (2) C-0133 8-32 x 1-1/2" Hex Standoffs using the (2) C-0141 8-32 x 1-1/2" Socket Screws.

  7. Once installation is complete and the reader has been setup and tested, apply the C-0015 label over the front of the reader.

  8. Apply the C-5035 Label over the coin drop opening.