_1075
- Chris Kite
Part #: C-0015
Desc 1: Label
Desc 2: Reader Cover Label
Qty: 1
Part #: C-5033
Desc 1: Label
Desc 2: 4-5/8" x 3-1/2"
Qty: 1
Part #: C-0133
Desc 1: Standoff
Desc 2: 8-32" x 1-1/2" - Hex
Qty: 2
Part #: C-0140
Desc 1: Screw
Desc 2: 8-32 x 3/4" - Cap
Qty: 2
Part #: C-0936
Desc 1: Vault Mount Bracket
Desc 2:
Qty: 1
Part #: C-5365
Desc 1: Bypass Harness
Desc 2: Alliance Coin Vault Bypass
Qty: 1
Part #: C-0906
Desc 1: Spacer Plate
Desc 2: 5 1/2" x 4 3/8"
Qty: 1
Remove existing coin box and coin drop.
Install the C-5365 Bypass Harness by removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.
Bend the side tabs of the C-0936 Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.
Attach the (2) C-0133 8-32" x 1-1/2" Standoffs to the Bracket.
Remove the protective film from the C-0906 Spacer Plate and place the card reader into the central opening so that the screw holes align with the two small holes in the plate.
After connecting all harnesses and ethernet cables to the reader, insert the card reader and C-0906 Spacer Plate into the coin vault so the two small holes of the plate align with the standoffs. Then secure the reader in place using the (2) C-0140 8-32 x 3/4" Screws.
Apply the C-0033 Label over the coin drop opening and the C-0015 Label over the card reader screw holes.
Â