_1047
- Chris Kite
Part #: C-5701
Desc 1: F1 Maytag Mounting Bracket
Desc 2: Small chassis stack dryers
Qty: 1
Part #: C-1060
Desc 1: Screw - Build: TK
Desc 2: 8-32 x 3/8" - Zinc
Qty: 4
Part #: C-5021
Desc 1: Label
Desc 2: Screw Cover
Qty: 1
Part #: C-5027
Desc 1: Label
Desc 2: Credit Card Logo
Qty: 1
Part #: C-5700
Desc 1: Mounting Bracket
Desc 2: Surface Mount
Qty: 1
Part #: C-0141
Desc 1: Screw
Desc 2: 8-32 x 1-1/2" - Cap
Qty: 2
Remove any cover or card reader plate attached to the payment device mounting bracket.
Place the C-5701 Mounting Plate behind the payment device mounting bracket and align the set of lower mounting points with that of the out set of threaded holes on the C-5701 Mounting Plate. Ensure the inner set of threaded holes are accessible through the central opening in the MayTag payment device bracket. Attach using (2) C-1060 8-32 x 3/8" Screws.
Place the C-5700 Mounting Bracket over the front of the assembly so that the set of circular openings align with the threaded holes of the C-5701 Mounting Plate accessible through the central opening. Attach using the remaining (2) C-1060 8-32 x 3/8" Screws.