_1045

Owned by Chris Kite
Jan 24, 2024
2 min read

 I-M0204

Part #: C-1060

Desc 1: Screw - Build: TK

Desc 2: 8-32 x 3/8" - Zinc

   Qty: 2

Part #: C-5702

Desc 1: Chase Nipple

Desc 2: 3/4"

   Qty: 1

Part #: C-5703

Desc 1: Lock Nut

Desc 2: 3/4" - 102-S

   Qty: 1

Part #: C-5027

Desc 1: Label

Desc 2: Credit Card Logo

   Qty: 1

Part #: C-5021

Desc 1: Label

Desc 2: Screw Cover

   Qty: 1

Part #: C-0141

Desc 1: Screw

Desc 2: 8-32 x 1-1/2" - Cap

   Qty: 2

Part #: C-5710

Desc 1: Rubber Grommet

Desc 2: 3/4"

   Qty: 1

Part #: C-6701

Desc 1: Adapter Plate

Desc 2: F1 to F2

   Qty: 1

Part #: C-0930

Desc 1: Mounting Bracket

Desc 2: Unimac/ADC

   Qty: 1

Part #: C-0940

Desc 1: Vault Cover

Desc 2: 3-7/8" x 2-3/4"

   Qty: 1

Part #: C-5700

Desc 1: Mounting Bracket

Desc 2: Surface Mount

   Qty: 1

  1. Align the central, circular opening of the C-5700 Mounting Bracket with that of the C-6701 Adapter Plate on the side without the self-clinching nuts. Also be sure to align the C-5700 Mounting Bracket so that the outer set of holes in the C-6701 Adapter Plate are not covered.

    image-20240124-235445.png

  2. Insert the C-5702 Chase Nipple into the central, circular opening and then attach the C-5703 Lock Nut on the other side.

    image-20240124-235509.pngimage-20240124-235526.png

  3. Place the assembled bracket on the front side of the coin drop opening in the machine's cover panel and then place the C-0930 Mounting Bracket on the opposite side of the cover panel. Align with the upper set of threaded holes and fasten together using C-1060 8-32 x 3/8" screws. Bracket assembly should be firmly in place and covering the coin drop opening.

    image-20240124-235548.pngimage-20240124-235614.pngimage-20240124-235635.png

  4. Optional: If an additional drilled hole is required to run any reader harnesses, use the C-5710 Rubber Grommet to prevent damage from vibrations occurring during normal operation.