_1171

Owned by David Bussman
Apr 17, 2024
1 min read
 I-X0039

Part #: C-5353R1-144

Desc 1: Machine Start Harness (SA)

Desc 2: 144" - LaundryLux

   Qty: 1

Part #: C-6400

Desc 1: Stack Add On Board - SLV

Desc 2: Pulse / SingleVend

   Qty: 1

Part #: C-0940

Desc 1: Vault Cover

Desc 2: 3-7/8" x 2-3/4"

   Qty: 1

Part #: C-0907

Desc 1: Drop Cover

Desc 2: Wascomat TD 3030

   Qty: 1

Part #: C-1062

Desc 1: Nut

Desc 2: 4-40 - Kep

   Qty: 4

Part #: C-0136

Desc 1: Screw

Desc 2: 4-40 1/2" pan head zinc

   Qty: 4

The following steps assume a start harness is already connected to the upper pocket control.

  1. Run the C-5353R1-144 Machine Start Harness to the lower pocket Machine Control Assembly.

  2. Connect C-5353R1-144 Machine Start Harness to the Coin 1 connection on the lower pocket Machine Control Assembly.

  3. Connect the C-6400 Stack Add-on Board to port 5 (Serial Connection Port) on the card reader.

  4. Connect the white, 6-pin connector from the C-5353R1-144 Machine Start Harness to the J1 connection on the C-6400 Pulse Stack Add-On Board.

  5. Insert the C-0941 Vault Cover into the coin vault for the lower pocket’s control.

  6. Install the C-0907 Coin Drop Cover using the (4) C-0136 4-40 1/2” Pan Screws and (4) C-1062 4-40 Kep Nuts to secure in place.