2034 Reader Install Guide
- Chris Kite
- CCI Integration User
Warning!
This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.
It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.
Overview
Equipment Details
Type: Dryer
Manufacturer: LG
Make: LG
Model Length: Not Set
Giant-C Dryer
Giant-C Plus Dryer
Giant-C Fast WiFi 1.0 Dryer
Giant-C Max WiFi 2.0 Dryer
Titan-C Dryer
Titan-C Light WiFi 2.0 Dryer
Associated Models
GDL1329CED3
GDL1329CED7
GDL1329CES3
GDL1329CES7
GDL1329CEW3
GDL1329CEW7
GDL1329CEW8
GDL1329CGD3
GDL1329CGD7
GDL1329CGS3
GDL1329CGS5
GDL1329CGS7
GDL1329CGW3
GDL1329CGW7
GDL1329CGW8
GDL1329QES3
GDL1329QES7
GDL1329QEW3
GDL1329QEW7
GDL1329QGD3
GDL1329QGD7
GDL1329QGS3
GDL1329QGS7
GDL1329QGW2
GDL1329QGW3
GDL1329QGW7
GDP1329CED2
GDP1329CES
GDP1329CES2
GDP1329CEW
GDP1329CEW2
GDP1329CEW3
GDP1329CGS2
GDP1329CGU
GDP1329CGW
GDP1329CGW2
GDP1329LGS
GDP1329QES
GDP1329QES2
GDP1329QEW2
GDP1329QGD2
GDP1329QGS
GDP1329QGW2
TLD1840CES
TLD1840CGW
Recommended Tools and Supplies
Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure
Installation
Connect Power
Part #: C-5101
Desc 1: Spade Taps
Desc 2: 18-14 AWG
Qty: 3
Part #: C-5210
Desc 1: Power Adapter Harness
Desc 2: CGI
Qty: 1
Part #: C-5500
Desc 1: Power Extension Harness
Desc 2: 25.5"
Qty: 1
Part #: C-5602R1
Desc 1: Power Converter
Desc 2: SMT-012-018VW
Qty: 1
Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
Machine Configuration
CCI Software Configuration
| Machine Control | Pulse | Serial |
|---|---|---|
| Giant-C - Dryer | SingleVend (Relay) / 30ms | LG Giant-C Dryer |
| Giant-C Fast - WiFi 1.0 Dryer | SingleVend (Relay) / 30ms | LG Giant-C Plus Dryer |
| Giant-C Max - WiFi 2.0 Dryer | SingleVend (Relay) / 30ms | *NOT SUPPORTED* |
| Giant-C Plus - Dryer | SingleVend (Relay) / 30ms | LG Giant-C Dryer |
| Titan-C - Dryer | SingleVend (Relay) / 30ms | LG Giant-C Plus Dryer |
| Titan-C Light - WiFi 2.0 Dryer | SingleVend (Relay) / 30ms | *NOT SUPPORTED* |
Additional Resources
- How to Program Address on a FasCard Reader
- FasCard Admin Site - Equipment Setup
- FasCard Admin Site - Machine Setup
- FasCard Admin Site - Pricing & Features Schedule
- F1 Reader Mounting Guide
- FasCard F2/F3 Reader Installation Guide - Front Mount
- FasCard Installation Videos
- FasCard Kit Installations - Machine Configurations & Related Documents