3198 Reader Install Guide

Owned by Chris Kite
Last updated: Jan 26, 2024 by CCI Integration User
1 min read

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Small Dryer (Single)
Manufacturer: Alliance
Make: [VARIES]
Model Length: 8

Associated Models


BDE907WF
BDGT09WF
HDET07WF
HDEY07WF
HDG109WF
HDG909WF
HDGT07WF
HDGT09WF
HDGY09WF
JDE907WF
KFEG17NF
KFET17NF
KFEY17NF
KFGG19NF
KFGT19NF
KFGY19NF
SDE907QF
SDE907WF
SDEB07WJ
SDET07WF
SDEX07WF
SDEY07WF
SDG109WF
SDG909WF
SDGT09WF
SFET07WF
SFEX07WF
SFEY07WF
SFGY09WF

Recommended Tools and Supplies

  • Drill

  • 1 1/8" Tungsten Carbide Tipped Hole Cutter

  • Cutting Oil

  • 9/64" Drill Bit

  • Center Punch

  • Hammer

  • Fine Point Permanent Marker

  • Pliers

  • Tape Measure

Installation

Machine Configuration

CCI Software Configuration

Machine ControlPulseSerial
Coin Slide - Mechanical Timer*NOT SUPPORTED**NOT SUPPORTED*
Coin Slide Hybrid (Pulse)SingleVend (Relay) / 80ms*NOT SUPPORTED*
EDCSingleVend (Relay) / 80ms*NOT SUPPORTED*
MDC (Vended)SingleVend (MLV+) / 80msAlliance MDC Small Dryer
NetMasterSingleVend (Relay) / 80ms*NOT SUPPORTED*
Nonmetered*NOT SUPPORTED**NOT SUPPORTED*

Additional Resources