3250 Reader Install Guide

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Stack Washer/Dryer
Manufacturer: Alliance
Make: [VARIES]
Model Length: 15

Associated Models


BTEBCASP173TW01
BTEBXASP433AW01
BTGBCASP113TW01
BTGBXASP303AW01
HTEBCASP173TW01
HTEBXASP133DW01
HTEBXASP283CW01
HTEBXASP293CW01
HTEBXASP543DW01
HTGBCASP113TW01
HTGBXASP093CW01
HTGBXASP123DW01
HTGBXASP543DW01
STEBCASP173TW01
STEBXASP133DW01
STEBXASP173TW01
STEBXASP303UW01
STEBXASP433AW01
STEBXASP543DW01
STEBXASP543ZW01
STGBCASP113TW01
STGBXASG113TW01
STGBXASP113TW01
STGBXASP123DW01
STGBXASP303AW01
STGBXASP303ZW01
STGBXASP543DW01

Recommended Tools and Supplies

  • Drill

  • 1 1/8" Tungsten Carbide Tipped Hole Cutter

  • Cutting Oil

  • 9/64" Drill Bit

  • Center Punch

  • Hammer

  • Fine Point Permanent Marker

  • Pliers

  • Tape Measure

Installation

Connect Coin Sense Harness

 I-S0027

Part #: C-6250

Desc 1: Coin Sense Harness

Desc 2: F2

   Qty: 1

  1. Disconnect the Coin Drop from the machine control assembly.

  2. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.

Machine Configuration

Washer Control

Dryer Control