3178 Reader Install Guide

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Tumble Dryer (Stack)
Manufacturer: Dexter
Make: [VARIES]
Model Length: Not Set

Make Variants:
Dexter
Speed Queen

No way to identify what payment system machine is prepped for. Must confirm with customer for card only mounting kit selection.

Associated Models

DL2X30C
DL2X30CGQ
DL2X30CGQSS
DL2X30CQ
DL2X30GCQSS
DL2X30GG0SS
DL2X30QA
DL2X30QSS
DL2X30QSSTS
DL2X30QWHT
DL2X30SS

Recommended Tools and Supplies

Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure

Installation

Connect Machine Interface Harness

I-T0038

Part #: C-5254

Desc 1: Machine Start Harness

Desc 2: Dexter Stack Dryer

Qty: 1

Connect the C-5254 Machine Start Harness to the Coin connection on the Machine Control Assembly.

I-T0016

Part #: C-0113